fbpx
Photopolymer

Full Color Mimaki

Material Jetting

Material info

About Full Color Mimaki

Using the UV curing inkjet process, the UV ink (CMYK, White, Clear) is cured layer by layer. This can produce objects with more than 10 million different colors. Final parts can satisfy professionals’ exacting requirement to make full color and fine modeling of high details, for example, figures, 3D maps and architecture mock-ups. And the post processing like over coating and attachment of screws is also able to apply to an object after printing.

Color & Finishes

Technology

  • Material Jetting

Technical Documents

Description

Applications
Figurines, Medical Models, Architecture, Terrain Models, Realistic Visual Prototypes

Design Guidelines

Bounding Box

Bounding Box Max
508 x 508 x 305 mm

Bounding Box Min
2.5 x 2.5 x 2.5 mm

The bounding box is a 3D imaginary outline of a box that encloses the smallest area occupied by your model. Your model must be within the minimum and maximum bounding box sizes. If the size of the model is close to the maximum bounding box, then the printing orientation will be restricted.

Walls

Supported Wall Thickness Min
1 mm
Unsupported Wall Thickness Min
1 mm
A supported wall is connected at least on two sides of the wall, while an unsupported wall is connected only on one side of the wall. Walls that do not meet the minimum requirements may not survive printing and cleaning processes. Additionally, models may still be rejected based on the wall geometry of the model. Please consider the size of your model and reinforce the walls or add support structures as needed as minimum guidelines will not always be adequate for large models.

Wires

Supported Wires Min
0.8 mm
Unsupported Wires Min
1 mm
A wire is a circular, rectangular or even triangular feature that is thinner in its unconnected directions than its length. A supported wire is connected at least on two sides of the model, while an unsupported wire is connected on one side of the model. Wires that do not meet the minimum requirements may not survive printing and cleaning processes. Additionally, models may still be rejected based on the wire geometry of the model. Please consider the size of your model and reinforce the wires or add support structures as needed as minimum guidelines will not always be adequate for large models.

Details

Details Min Embossed
1 mm
Details Min Engraved
1 mm
For text, the ratio between width and depth, should be 1:1 and sans-serif fonts are preferred for line weight consistency.

Escape Holes

Single Escape Hole Diameter (Min)
3 mm
Multiple Escape Hole Diameter (Min)
3 mm
Escape holes are necessary to empty the support material of a hollow model. Two escape holes at the opposite ends of the model is optimal for the support removal process. Please consider the size of your model and make the escape holes bigger or add more escape holes as needed as minimum guidelines will not always be adequate for large models.
A single escape hole at the end of a cavity will not allow material in the corners near the escape hole to fully escape. So we recommend multiple escape holes at both ends of the cavity.

Clearance

Min
0.4 mm, Hole 1 mm
Clearance is the space between two individual parts in a model. If the space among the individual parts do not meet the minimum clearance, then parts can fuse together or can be difficult to clean. This is important for movable pieces like hinges, gears, etc.

Interlocking & Enclosed Parts

Interlocking
Yes

Enclosed
Yes

Parts in File

Max
99

Accuracy

Accuracy 99% 0.02 mm
10.000.000 colors → photorealistic
For example: a product with dimensions of 50x50x100 mm can be 0.15 mm + 0.0015*100 mm = 0.3 mm bigger or smaller in any direction.

Other Materials

SLS, Polypropylene (PP)
Ultrasint® PP nat 01
Chemical resistanceHigh ductilityHigh elongation at break 30%
Application: Coolant reservoirs, custom production tools, electrical and sports goods, health care and orthopedic products
SLS, Nylon 6 Mineral Filled
Ultrasint® PA6 MF
Application: Engine bay parts Media flow and storage parts (i.e. oil) Housings and covers Tooling equipment & molds Multi-purpose industrial goods

We use cookies to offer you a better browsing experience, including personalized advertising. By continuing to use the site you agree to their use.

Learn more